Cleaning Tips

1) Never do more than 5 or 6 minutes of ultrasonic every half hour.
2) Only add water as it evaporates (not more new solution) to
maintain level of solution after initial fill up of tank.
3) During the ultrasonic cycle use the block (gently moving it
acress the roll back and forth) to help remove ink that is ready to
come off rolls. After 5 or 6 minutes of ultrasonics, whatever dark
spots or sections are still on the roll indicates more soaking time is
needed.
4) When roll is done, do not remove roll over turner to avoid
getting solution on it.
5) Rinse roll with tap water and dry with cloth or paper towel.
6) For SS-2800 (single roll cleaner), one tank full of solution will
last approximately 150 inches of roll cleaning. Perhaps you can
record the amount of cleanings at the tank.
* This guide is for first time use and until all rolls have been cleaned
once. After first time cleaning, you may get twice the amount of
inches per tank full depending on how often rolls are cleaned and
how dirty they are between cleanings. Eventually you will discover
how many rolls you can clean per tank full of solution. You can
also use these techniques as a guideline to regular use of our
cleaning systems. The differences may vary but the time spent
soaking should be reduced.